Last Updated on March 25, 2023 by Tabraiz
Importance for water heater maintenance:
Most of us like having heated water, which we often take for granted. Water heater maintenance is essential to maintain the hot water flow and reduce the risk of cold showers. It also helps to assure safety, efficiency, and longevity. But if it isn’t maintained, just like any piece of machinery, it will probably malfunction.
The safety of your water heater is first and foremost. Water heaters include safety features that must be tested yearly. By releasing water, the temperature and pressure valve shields your water heater from high pressures and temperatures. This should be examined at an annual inspection for safety reasons.
Maintaining your water heater also guarantees that it operates efficiently. The accumulation of calcium plays a significant role in the decreased effectiveness of your system. The volume of water that can be heated is decreased and the production of hot water is made more challenging by the minerals that collect at the bottom of your water heater. These minerals can produce hot spots in gas water heaters, which can cause tank damage and failure. These minerals may result in the lower heating element failing in electric models. These minerals will be eliminated by flushing your tank during a maintenance examination, which will improve its performance and lower your energy usage.
The longevity of your water heater will be shortened if maintenance is neglected. Regular maintenance will reveal faults that can be rectified before they develop into significant problems that necessitate replacing the unit. For instance, it can assist you in determining whether rust build-up, one of the primary causes of water heater replacement, is present. If you notice rusty water, your water heater may be inside rusting, which could cause a leak and possibly tainted water.
Tips for water heater maintenance for homeowners
1. Space around the geyser: Remember to provide some space around the geyser when installing a water heater so that there is room for expansion. The technician won’t be able to properly fix or repair the water heater if they don’t have enough room to move around and inspect the water heater’s components. Hire knowledgeable installers from Urban Clap to do the installation correctly. Additionally, it should be simple to service or repair if necessary. Although some individuals place the geyser just over the toilet to supposedly improve access, this makes it difficult for the technician to access the equipment. It is much preferable to mount it on a piece of the wall that is free of obstructions below today-today and is far from moist spaces like the shower, bathtub, or toilet. This makes it simple for you or anybody else to reach it using a tiny stool.
2. Install the water heater at a suitable height: According to experts, the geyser should be installed at least 1.8 metres (6 feet) above the ground. This makes sure that the water pressure is enough and that your taps don’t just trickle but instead provide a strong flow of hot water.
3. Make sure the geyser is attached to an MCB, or miniature circuit breaker, which shuts off electricity in the event of power fluctuations. The likelihood of a water heater short circuit will be reduced as a result. Keep the switch high enough to keep little children away from it without being so high that you or any other adult has trouble reaching it.
Day-to-day water heater maintenance for homeowners
1. Avoid leaving the geyser on for a long time:
The geyser is frequently left on for a long time, especially in the morning. Everyone loves warm water before hurrying out to work or school, therefore it is generally believed that leaving the geyser on will save time. Geysers today heat water in less than 5 minutes, even though this may have been the case in the past. The geyser will last less time if you turn it on an hour before you need it, thus it makes more sense to turn it on just five minutes before you need it. With regular maintenance, your water heater’s lifespan can be extended.
2. the temperature will help you save more electricity:
Maintaining your water heater will help you save money on power! The temperature will help you save more electricity! Selecting a lower temperature setting will cause the water to warm up more rapidly. The decreased temperature will need the geyser to run less frequently, extending its longevity. Additionally, using warm water from the faucet rather than excessively hot water might help you avoid any unintentional burns. Particularly for families with young children, lower the thermostat. To ensure that you never run out of hot water during the winter, frequent maintenance of your water heater is crucial.
3. the anode rod inside the tank before winter:
A generally pro anode rod is located within the tank of larger geysers. Rust and other pollutants in the water are drawn to this rod, keeping the tank from corroding or rusting. But as a result, every few years, it itself corrodes away. According to experts, you should inspect the anode rod every three years to determine if the magnesium layer on the outside has corroded away and the inner steel core is visible for at least 6 inches. The rod has to be changed if that is the case. The rod must also be replaced if it is covered in whitish calcium deposits (hard water causes this), or if its thickness has significantly decreased to less than half an inch.
4. A pressure release valve check:
The condition of the temperature and pressure release valves should be checked at least once every year. By releasing the pressure a few times, you can verify this. If the water heater’s relief valve is leaking, it is a serious problem. Your water geyser only needs to have some water drained out of it and the outlet tube removed. After that, just replace the valve, and you’re done!
5. Pay attention to the plug:
Your switch will occasionally spark due to power fluctuations and the low capacity cable used for the power socket. As a result of the higher energy wattage heating up the plug and the pins and leaving burn traces, you will also notice burn marks on the plug. It is always preferable to use connections and plugs that are brand new, properly wired, and plugged in to avoid any further electrical short circuits caused by this. Additionally, try to use an MCB switch rather than a regular one because MCBs are more durable than regular plugs and will stop any short-circuit from occurring. The third option is to only turn on the geyser when necessary and turn it off right away when finished.